power.jpg (5308 bytes)                            

Welcome to Martek Power Abbott, Inc.



HB Series >>  HB30S
30-Watt Single Output Power Supply
 

HB30S DC-DC Power supply

orge_arr.gif (136 bytes)download HB30S specification in .pdf  

Features
dot.gif (332 bytes) Internal EMI Filter
dot.gif (332 bytes) SMD footprint
dot.gif (332 bytes) Remote Turn on
dot.gif (332 bytes) Remote Sense
dot.gif (332 bytes) Output Overvoltage Protection
dot.gif (332 bytes) Output Overcurrent Protection
dot.gif (332 bytes) Over Temperature Protection
dot.gif (332 bytes) 100% Environmental Screening (M Models)

 

How to Order

Nomenclature

 

How To Order
Series: HB
Total Output Power: 30 Watts
Output: "S" for Single
Product Grade: "M" for Screened           
"I"  for Unscreened
Output Voltage: 2/3.3/5/5.2/9/12/15/24/28

 

Selection Chart
Nominal Output (Volts) Output Current (Amps) Model Number (Unscreened) Model Number (Screened)
2.0 6.0 HB30SI/2 HB30SM/2
3.3 6.0 HB30SI/3.3 HB30SM/3.3
5.0 6.0 HB30SI/5 HB30SM/5
5.2 5.8 HB30SI/5.2 HB30SM/5.2
9 3.3 HB30SI/9 HB30SM/9
12 2.5 HB30SI/12 HB30SM/12
15 2.0 HB30SI/15 HB30SM/15
24 1.3 HB30SI/24 HB30SM/24
28 1.1 HB30SI/28 HB30SM/28

 

Input Characteristics
   Min Typ Max Units
Input Voltage 16 28 40 Vdc
Brown Out
(100% of Full Load) 		   12 14 Vdc
Logic Disable Current (Sink)      150 µA
Logic Disable Power In 300 500 Mw
Efficiency (Full Load)    
   >=5Vdc Output (FL) 80 84 %
   3.3 Vdc Output (FL) 74 78        %
   2 Vdc Output (FL) 68 72   %
EMI Units conform to Mil-Std-461E
Input Transient Units can withstand 50V transients for up to 100ms per Mil-Std-704E

 

Output Characteristics (Test method per IEEE 1515)
    Min Typ Max Units
Set Point Accuracy
 (or 1% max., whichever is 
greater )		 50 mV
Load Regulation
(or 0.2% max., whichever is 
greater from no load to full 
load)		     25 mV
Line Regulation
(or 0.2% maximum, whichever 
is greater from low load to full
load)		 25 mV
Ripple P-P (10 MHz)
(or 1% max, whichever is
greater)		         100 mV
Overvoltage Protection 125 % Vout
Transient Response (Vout 1%) Time/Overshoot*
      20-80% Load     100/100 500/250 µS/mV
      Low Line-High Line  100/100  500/250 µS/mV
      50-100% Load   100/100 500/250 µS/mV
Temperature Drift   0.05 %/ °C
Current Limit 105 150 % Iout
Short Circuit Current 25 50 75 % Iout
Turn on Time   5 mS
Logic Turn On Time       2.5        mS

* = or 5% maximum, whichever is greater

 

Temperature Characteristics
Min Typ Max Units
Operating (Case) -55    +100 oC
Storage (Ambient) -55 +125 oC
Thermal Resistance Case (Ambient)    13    oC /W

 

Isolation Characteristics
Min Units
Isolation:       
      Input to Output 500 Vdc
      Output to Base 250 Vdc
      Input to Base 250 Vdc
Insulation Resistance(@50Vdc) 50 MOhm

 

Environmental Screening -  M MODEL
Stablization Bake: +125 °C for 24 hours per Mil-Std-883, M1108, Condition B
Temperature Cycling: 10 cycles at -55 °C  to +125 °C (transition period 5 °C / min.) per Mil-Std-883, M1010, Condition B
Burn in: 160 hours at 85 °C minimum with V in = 28 Vdc and output at full load
Final Testing                          
See "Guide to Operation" for full details.

 

Environmental Screening -  I MODEL
Burn in: 16 hours at 85 °C minimum  with Vin = 28 Vdc and output at full load
Final Testing
See "Guide to Operation" for full details.

 

Mechanical Characteristics
Weight 2.4
68		 oz. max.
grams max.
Size 1.12 x 2.85 x 0.60
28.5 x 72.4 x 15.2		 inch
mm
Volume 1.92
31.37		 inch3
cm3
Material Pin Brass (Solder Plating)
  Base Aluminum 5052-H32
Case 28 GA CR5(Nickel Plating)
Mounting Standard 4-40 inserts provided in baseplate