| Product Info |
 |
28V Input Mil DC-DC Converter
150 Watts Single Output,
14-40 Vdc Input.
|
|
|
Features |
| Fully rated for -55C to 100C |
| 0.38 Inch Profile |
| Fixed Frequency Power Conversion |
| MIL-STD-883 Screening Available |
| Remote Turn-On (TTL) |
| MIL-STD-704D |
| Synchronization |
| |
| Input Characteristics |
Min |
Max |
Typical |
Units/Comments |
| Input Voltage Range |
14 |
40 |
|
28 VDC, Nominal |
| Brown Out: |
|
12VDC Min at 75% FL |
|
Vdc |
| Input Ripple: |
|
|
15% Input Current at FL |
|
| Efficiency Range: |
|
|
Up to 83% typ. |
|
| |
|
|
|
|
| Output Characteristics |
Min |
Max |
Typical |
Units/Comments |
| Output Power(Max.): |
|
150 |
|
Watts |
| Number of Outputs: |
|
1 |
|
|
| |
|
|
|
|
| Model |
Main Output Voltage (VDC) |
Aux 1 Nom. Vout (VDC) |
Aux 2 Nom. Vout (VDC) |
Main Output Current (Amps) |
Aux 1 Output Current (Amps) |
Aux 2 Output Current (Amps) |
| NB150S/2 |
2 |
|
|
30 |
|
|
| NB150S/3.3 |
3.3 |
|
|
30 |
|
|
| NB150S/5 |
5 |
|
|
30 |
|
|
| NB150S/5.2 |
5.2 |
|
|
28.8 |
|
|
| NB150S/12 |
12 |
|
|
12.6 |
|
|
| NB150S/15 |
15 |
|
|
10 |
|
|
| NB150S/24 |
24 |
|
|
6.3 |
|
|
| NB150S/28 |
28 |
|
|
5.4 |
|
|
|
| |
|
|
|
|
| Trim Range: |
|
|
100 - 110% Vout |
|
| Current limit: |
|
|
105 - 150% Iout |
|
| Overvoltage Protection: |
|
|
150% max latching |
|
| Short Circuit: |
|
|
Indefinite, Auto Recovery |
|
| Minimum Load: |
|
|
0 |
|
| Load Regulation: |
|
|
5mV Typ |
|
| Line Regulation: |
|
|
5mV Typ |
|
| Ripple/Noise: |
|
|
45mV Typ |
|
| |
|
|
|
|
| Isolation Characteristics |
|
| Input to Output: |
500 Vdc min. |
| Output to Base: |
250 Vdc min. |
| Input to Base: |
250 Vdc min. |
| |
|
|
|
|
| Environmental Characteristics |
|
| Operating Temperature: |
-55 to 100 °C |
| Storage Temperature: |
-55 to 125 °C |
| Over-Temperature Shut Off: |
105 °C |
| |
|
|
|
|
| Mechanical Characteristics |
|
| Dimensions: |
3.0 x 4.5 x 0.38 inches
|
| Case Material: |
28 Gauge Steel (Cold Rolled) |
| Pin Material: |
Brass (SolderPlating) |
| Finish: |
Nickel Plating |
| Mounting: |
See data sheet |
| Connectors: |
Pins |
| |
|
|
|
|
| Applicable Standards |
|
| EMI |
Mil-Std 461D with companion filter |
| Input Transient |
Confirms to Mil-Std-704D for transients up to 50V for 0.1 SEC. |
