| Product Info |
 |
28V Input Mil DC-DC Converter
30 Watts Single Output. 16 - 40 VDC Input.
|
|
|
Features |
| Fully rated for -55C to 100C |
| Fixed Frequency Power Conversion |
| Remote Turn-On (TTL) |
| 100% Environmental Screening Avilable (Similar to MIL-STD-883) |
| Overtemperature Protection |
| Output Voltage Trim |
| |
| Input Characteristics |
Min |
Max |
Typical |
Units/Comments |
| Input Voltage Range |
16 |
40 |
|
28 VDC, Nominal |
| Brown Out: |
|
13.5 Vdc MAX at 75% FL |
|
Vdc |
| Efficiency Range: |
|
|
Up to 87% typ. |
|
| |
|
|
|
|
| Output Characteristics |
Min |
Max |
Typical |
Units/Comments |
| Output Power(Max.): |
|
30 |
|
Watts |
| Number of Outputs: |
|
1 |
|
|
| |
|
|
|
|
| Model |
Main Output Voltage (VDC) |
Aux 1 Nom. Vout (VDC) |
Aux 2 Nom. Vout (VDC) |
Main Output Current (Amps) |
Aux 1 Output Current (Amps) |
Aux 2 Output Current (Amps) |
| CB30S/2 |
2 |
|
|
6 |
|
|
| CB30S/3.3 |
3.3 |
|
|
6 |
|
|
| CB30S/5 |
5 |
|
|
6 |
|
|
| CB30S/5.2 |
5.2 |
|
|
5.8 |
|
|
| CB30S/12 |
12 |
|
|
2.5 |
|
|
| CB30S/15 |
15 |
|
|
2 |
|
|
| CB30S/24 |
24 |
|
|
1.3 |
|
|
| CB30S/28 |
28 |
|
|
1.1 |
|
|
|
| |
|
|
|
|
| Trim Range: |
|
|
90-110% Vout |
|
| Current limit: |
|
|
105% - 150% Iout |
|
| Remote: |
|
|
0.5 Vdc Typ. |
|
| Overvoltage Protection: |
|
|
125% Vout TYP. |
|
| Short Circuit: |
|
|
Indefinite, Auto Recovery |
|
| Minimum Load: |
|
|
0 |
|
| Load Regulation: |
|
|
10mV, TYP. |
|
| Line Regulation: |
|
|
10mV, TYP. |
|
| Ripple/Noise: |
|
|
50mVpp, TYP. |
|
| |
|
|
|
|
| Isolation Characteristics |
|
| Input to Output: |
500 Vdc min. |
| Output to Base: |
250 Vdc min. |
| Input to Base: |
250 Vdc min. |
| |
|
|
|
|
| Environmental Characteristics |
|
| Operating Temperature: |
-55 to 100 °C |
| Storage Temperature: |
-55 to 125 °C |
| Over-Temperature Shut Off: |
13 °C/W |
| |
|
|
|
|
| Mechanical Characteristics |
|
| Dimensions: |
1.1 x 2 x 0.38 inches
27.9 x 50.8 x 9.7 mm
|
| Weight: |
< 45 grams
|
| Case Material: |
28 GA Steel |
| Pin Material: |
Brass (Solder Plating) |
| Finish: |
Case - Nickel Plating |
| Mounting: |
See data sheet |
| Connectors: |
Pins |
| |
|
|
|
|
| Applicable Standards |
|
| EMI |
MIL-STD-461D,with CBF30. |
| Input Transient |
Withstand 50V transients for up to 0.1 sec |
